Graphtec FCX2000 Series

Graphtec FCX2000 Series

Contact Person :
Roni Rahmat  +62 818 0685 5068
Arif Tri Hadi    +62 819 1554 5768

Additional Information

      • World’s best cutting quality

      • High-end flagship Grid Rolling Cutter model with advanced operation and efficiency-boosting features

      • Cutting Area Selection 60 / 120 / 180 cm; Width 90 cm
      • Ease of use with great media tracking on long runs.
      • Cutting Pressure up to 1Kg Cutting force with tool 2
      • Cut up to 500 gsm art carton, can be up to 2mm with special blade (CB30)
      • Vacuum Table for strong media hold.
      • Networking Support, offline output using USB memory and data management function using Barcode.

 

Item FCX2000-60VC FCX2000-120VC FCX2000-120ES (*1) FCX2000-180VC
Configuration Digital servo system, Flatbed
Media hold-down method Vacuum suction Vacuum suction Electrostatic adhesion Vacuum suction
(Holes pitch: 20 mm) (Holes pitch: 20 mm) (Holes pitch: 20 mm)
Effective cutting area 610 x 920 mm 1200 x 920 mm 1800 x 920 mm
[24 x 36.2 in.] [47.2 x 36.2 in.] [70.9 x 36.2 in.]
Mountable media 950 mm [37.4 in.] 950 mm [37.4 in.] 950 mm [37.4 in.]
Media type (*2) • Marking film (Vinyl, fluorescent, and reflective)  • Marking film (Vinyl, fluorescent, and reflective)  • Marking film (Vinyl, fluorescent, and reflective)  • Marking film (Vinyl, fluorescent, and reflective) 
• Heavy paper/card, up to 1 mm thick. • Heavy paper/card, up to 1 mm thick. • Heavy paper/card, up to 1 mm thick. • Heavy paper/card, up to 1 mm thick.
• Polystyrene foam board, up to 0.8 mm thick. • Polystyrene foam board, up to 0.8 mm thick. • Sandblast resist rubber, up to 1mm thick. • Polystyrene foam board, up to 0.8 mm thick.
• Sandblast resist rubber, up to 1mm thick. • Sandblast resist rubber, up to 1mm thick. • Cardboard (Micro-flute F, G flute) • Sandblast resist rubber, up to 1mm thick.
• Cardboard (Micro-flute F, G flute) • Cardboard (Micro-flute F, G flute) • Clear sheet for plastic boxes • Cardboard (Micro-flute F, G flute)
• Clear sheet for plastic boxes • Clear sheet for plastic boxes   • Clear sheet for plastic boxes
• High-intensity reflective film • High-intensity reflective film)   • High-intensity reflective film
Maximum cutting speed 400 mm/s [15.7 ips] at all direction
Configurable cutting speed 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 15, 20, 25, 30, 35, 40 cm/s
Acceleration 5.88 m/s2 [19.3 fps2] (0.6 G)
Maximum cutting force Tool 1: 4.9 N (500 gf), Tool 2: 9.8 N (1 kgf)
Configurable cutting force Tool 1: in 40 steps up to 4.9 N, Tool 2: in 40 steps up to 9.8 N
Minimum character size (*3) Approx. 10 mm alphanumeric (varies depending on character font and media)
Mechanical resolution 0.0025 mm (25 μm)
Programmable resolution GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GLTM: 0.025 mm
Distance accuracy (*3) Max. 0.1 mm or 0.1% of plotted length
Perpendicularity Max. 0.5 mm deviation in 900 mm destination (in plotter mode)
Repeatability (*3) Max. 0.1 mm (in plotter or the cutting mode)
Standard interface USB 2.0 (High speed), RS-232C, Ethernet (10BASE-T / 100BASE-TX)
Buffer memory 2 MB
Command sets GP-GL, HP-GLTM emulation (Set it by menu or command, and auto detection)
Mountable number of tools Two (2) tools simultaneously
Tool types Cutting blade (Supersteel), Water-based fiber-tip pen, Oil-based ballpoint pen, Creasing tool
Registration mark sensing system Scans the mark by optical sensor (ARMS 6.0), 4-point axis alignment, Auto mark detect, Multiple-mark compensation, ISM, Copy function with ARMS, Setting the scan starting point in the copy mode, Cutting/creasing at reverse-side with the ARMS, Support the crop mark for Adobe Illustrator
Registration mark type Size: 5 to 20 mm, Line width: 0.3 to 1 mm (Line width is 0.3 to 0.4 mm when 5 mm size mark is used.)
Mark sensing margin 6 mm around the mark
Operation in the off-line Using the plot data file in the USB flash memory (up to 64 plot data files)
Management of plot data Automatically selecting file in the USB flash memory using printed barcode
Other functions Copy, Create a Crease line, Cutting/creasing in multi-passes, Create a Crease line of the curve, Dual configuration, Cutting blade wastage level display, Job size confirmation, Faster throughput in the curve (Draft mode, it is not guarantee the accuracy)
Display Graphic type LCD (3.7-inch, backlight)
Roll media Load the roll media to the hanger (feeding the media manually), loadable media: up to 950 mm [37.4 in.] & up to 5 kg [12.1 lb]
Compatible OS (*4) Windows 10 / 8.1 / 8 / 7 / Vista, Mac OS X 10.6 to 10.11 (using plug-in or application software)
Compatible Standards Safety: UL/cUL (UL60950-1), CE marking (EN60950-1), KC, PSE
EMC: FCC class A, CE marking (EN55032-A), KC, VCCI Class A
Power source 100 to 240 V AC, 50/60 Hz (Auto switching) 
Power consumption 140 VA
Environment condition Operating environment: 10 to 35 ºC, 35 to 75% RH (non-condensing)
Guaranteed accuracy environment: 16 to 32 ºC, 35 to 70% RH (non-condensing)
External dimensions (*5) 1344 x 1049 x 930 mm 1934 x 1409 x 930 mm 2534 x 1409 x 930 mm
(W x D x H) (approx.) [52.9 x 55.5 x 36.6 in.] [76.1 x 55.5 x 36.6 in.] [99.8 x 55.5 x 36.6 in.]
Weight (approx.) (*6) 76 kg [167 lb] 99 kg [218 lb] 93 kg [205 lb] 116 kg [255 lb]
including stand including stand including stand including stand
 
*1: Available in a limited region.
*2: Relationship of the media and tools, refer to the sheet of the media type.
*3: When operated with Graphtec specified media and conditions.
*4: For more information about Windows and Macintosh compatibility, please check the website or contact your local representative.
*5: Including the stand.
*6: The pump (blower) is not included.

Related products

CANON MF 643CDW
CANON LBP 226DW
CANON LBP 226DW
CANON MD 543X